Our Products

Search
<p>YOFC ADSS cable is loose tube stranded. Fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around FRP(Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered with a thin polyethylene (PE) inner sheath. After two layers of Aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.</p> <p><em><strong>Application:</strong></em> Aerial</p>

All Di-electric Self Support Cable (ADSS)
<p>Micro-cable is the small diameter stranded loose tube cable for fast installation in micro-duct systems. Micro-cable is also named as small diameter blown cable. Micro-cable uses an advanced fiber optic cable technology that allows maximum utilization of existing or future conduit systems with minimal initial investment. Using micro-duct technology, Micro-cables are jetted through a network of micro-ducts. Changing or adding to the existing network is as simple as jetting new fiber optic cables through existing micro-ducts that are part of the existing conduit system. This reduces capital costs and allows user to build a network to the size that customer need, while providing the ability of expanding capacity in the future.</p> <p><em><strong>Application:</strong></em> Duct</p>

4-144F Micro Cable (GCYFTY)
<p>Roader cable is a kind of cable that is small and easy for the laying. Its laying only needs to cut a narrow trench in the roadway, bury the cable in the trench, fill the trench and recover the roadway surface. This cable consists of the singlemode or multimode fibers, the loose tube, the Aramid yarn as strength member, the steel tape and the polyethylene (PE) sheath. It has the advantages such as light, soft, easy for the laying, low cost and fast laying speed.</p> <p><em><strong>Application:</strong></em> FTTH</p>

Roader (GLFXTS)
<p>Ductingwaiver cable is a kind of cable that is laid in the drainage way. It has good mechanical and moisture-proof performance and it is chemical corrosive-proof. It has mouse-proof and ant-proof function. This cable has simple structure and low total cost. It provides a totally new solution for the telecommunication operator.</p> <p><em><strong>Application:</strong></em> Duct/Aerial</p>

Ductingwaiver (GPTCA63)
<p>This cable is a small "Figure 8" cable. This cable consists of the loose tube with singlemode or multimode fibers and steel wire as the messenger wire, which are formed like "Figure 8" Then it is completed with a polyethylene (PE) sheath. This cable is light, flexible, and easy for the laying and it is one of products for the FTTH solution.</p> <p><em><strong>Application:</strong></em> FTTH</p>

Leaper (GYAXTC8Y)
<p>The fiber ribbons, single-mode type, are positioned in the slotted core made of HDPE. A steel wire or a steel rope locates in the center of core as a metallic strength member. The slotted core is wrapped with a waterproof tape helical. Over the waterproof tape, an APL (Aluminum Polyethylene Laminate) is applied longitudinally. Then the cable is completed with a polyethylene (PE) sheath. A rip cord is placed between the APL and the waterproof tape in order to rip the cable easily.</p> <p><em><strong>Application:</strong></em> Duct / Aerial</p>

Slotted-core Ribbon Cable with Aluminum Tape (GYDGA)
<p>The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.</p> <p><em><strong>Application:</strong></em> Duct / Aerial / Direct buried</p>

Stranded Loose Tube with Aluminum and Steel Tape plus Non-metallic CSM Double Sheaths (GYFTA53)
<p>The fibers, either of single-mode or multimode type, are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes and fillers are stranded around the strength member into a compact and circular cable core. The cable is completed with a polyethylene (PE) sheath.</p> <p><em><strong>Application:</strong></em> Duct / Aerial</p>

Stranded Loose Tube Cable with Non-metallic CSM (GYFTY)
<p>The fibers, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water-ingress. Then, the cable is completed with a PE sheath.</p> <p><em><strong>Application:</strong></em> Duct/Aerial</p>

Stranded Loose Tube Cable with Aluminum Tape (GYTA)